Solar Charge Maximizing Controller

Solar Charge Maximizing Controller Works With MPPT Solar Charge Controllers _Called Solar Charge Maximizing Controller System, to Maximize The PV Power Harvesting From the Sun in both off grid or grid tie systems.

The Solar Charge Maximizing Controller System (SCMCS) can be installed inside the building, or outside the building. The system can be implemented with or without an existing power grid.

The SCMC system minimizes the overheating concerns for the MPPT solar charge controllers.

The SCMC system allows the high DC current from the solar array to power the DC load directly without even charging the LiFePo4 battery or battery bank to extend the battery charging cycle life.

In the SCMC system, the clean energy from the solar array can be stored in the battery, hot water and green hydrogen without solar inverters.

In the SCMC system, the clean renewable energy is stored onsite without power transmission loss, DC-AC inverter & AC-DC converter power loss.

The SCMC system improves the resilience to the existing power grid system, as it works without a grid. Power Outage? No Problem!

Common Negative Solar Charge Maximizer Controller

Model Number: "24VCN120A+"

Specifications:

Nominal Voltage: 24VDV (25.6 ~ 29VDC, Matching 24V solar energy storage battery or battery bank, and nominal 24V solar panels);

Maximum Charge Current: 120 Amps plus charging current from a MPPT solar charge controller of maximum 80 amps;

Maximum Power Capacity: 5.0 KWs per system;

YouTube Free Educational Videos

The Solar Charge Maximum Controller System is totally different from the other Solar Array PV Systems you have designed or installed so far. You are encouraged to watch following YouTube Videos for your next off-grid or hybrid PV system project with a SCMC included to maximize the system capacity with limited capacity from a MPPT Solar Charge Controller.

Charging EVs & Powering Your Air Conditioning Units off grid with Solar Panels

SCMC system generates sufficient PV power supply for

Level 1 and Level 2 EV Charging Stations,

anywhere off grid or Grid-Tie

Thanks to the High Power Capacity of Solar Charge Maximizing Controller (SCMC) System, we now can build Off-Grid or Hybrid Solar Power Supply System for Level 1 and Level 2 EV Chargers to Charge EVs off grid.

ENERPAK provides SCMC systems design and installation services.

Please use the Contact Us Form to connect with us.

Would like to know more about "How to maximize the off-grid and hybrid Solar PV Systems Capacity"? You may be interested in following Udemy Course.

Watch the YouTube Video

A short video to explain what is a Solar Charge Maximizing Controller system, and the differences between a MPPT solar charge controller and a SCMC.

Benefit of Solar Charge Maximizing Controller

For high power off-grid PV system, such as PV power supply for level 1 (120VAC 30 Amps) and level 2 EV (240VAC 30 Amps) charging Stations;

Maximize safety with low voltage PV system;

For power supply capacity of 4.5 KW per SCMC system;

For hybrid solar power supply;

Serving behind-the-meter (BTM) storage system;

Serving behind the meter microgrid PV system;

Cutting your hydro bill;

Reducing electricity bill;

Providing power backup in case of power outage;

Providing solutions for limited MPPT solar charge controller systems;

Increasing the power limit of MPPT solar charge controller system;

Lowering PV system voltage to eliminate PID (Potential Induced Degradation) of photovoltaic panels;

Eliminating PID of photovoltaic panels;

Extending the service life of photovoltaic panels;

Minimizing power losses of PV systems;

TWITTER LINKEDIN YOUTUBE CHANNEL FACEBOOK

Watch the YouTube Video

A short video to explain how SCMC system is been used for the massive production of 100% Green Hydrogen; how we can have AC to DC converter, and DC to AC inverter waived; the why SCMC is the roadmap to net-zero carbon future.

SCMC systems for Renewable Hydrogen Production Solutions

Green hygrogen production;

Low voltage DC power supply for hydrogen production;

No DC-DC, nor AC-DC converters required;

DC power supply for hydrogen generation through water electrolysis process;

Power supply for water electrolyzer;

PV power for hygrogen electrolyzer;

Power supply for green hydrogen production;

DC power supply for hydrogen generation;

DC power supply for on-site gas generation;

MW scale green hydrogen water electrolysis power supply;

On-site hygrogen gas generation;

Power supply for On-site hydrogen generator;

DC power supply for hydrogen electrolyzer without inverters or converters;

DC power supply for hydrogen electrolyzer without power dissipation (power losses) of electronic components;

SCMC power supply for 1.0 Kg/Hour hydrogen production per station;

Sustainable power supply for Electric Vehicle Charging Stations;

Green power supply for EV chargers;

SCMC system Design & Installation Services

ENERPAK has in-house PV system design engineers. Depends on the project details, We will provide system design for free to prepare drawings for certain projects.

Type of services offerred

Lab high current DC power supply;

Heavy duty (200 amps and up) low voltage (25`30V) DC power supply;

Green Hydrogen Production on-site without grid power supply _system implementation;

Greenhydrogen farm without grid power supply _system implementation;

Solar charge maximizing controller system design;

Solar charge maximizing controller (SCMC) system installation;

Hybrid PV system design & installation;

Existing MPPT system re-configuration for maximum power supply;

Existing MPPT system re-configuration to eliminate PID (Potential Induced Degradation) of photovoltaic panels;

Behind-the-meter (BTM) energy storage system design and installation;

Green hydrogen production system design;

Residential PV system design and installation;

Commercial PV system design and installation;

Power backup system;

Micro-grid system design;

Remote community power supply;

High Capacity Off Grid PV Systems